Aries Shop-Floor CMM
A compact near-line CMM for production environments, fast feedback, and practical dimensional inspection close to manufacturing.
Aries brings coordinate measurement closer to production. Its compact structure, contamination-resistant axis design, temperature sensing, and relocatable footprint make it suitable for near-line inspection where speed, accessibility, and shop-floor practicality are critical.
Best For
Near-line production inspection.
Compact manufacturing cells.
In-process quality checks.
Small and medium machined parts.
Facilities that need CMM feedback without a dedicated climate-controlled room.
Machine Structure
Compact shop-floor CMM layout.
Stainless steel linear guideways.
Contamination-resistant axis design to protect internal components.
Integrated temperature sensors with 0.1 C resolution.
Rigid drive system and high-performance motors.
Relocatable structure suitable for standard pallet truck handling.
Accuracy, Travel, and Environment Specs
Aries454: X 400 mm, Y 500 mm, Z 320 mm, MPEe 3.5+L/300 um, MPEp 4.5 um.
Aries565: X 500 mm, Y 600 mm, Z 500 mm, MPEe 4.5+L/300 um, MPEp 5.5 um.
Operating temperature: 15-30 C.
Temperature gradient: <=1 C/hour and 2 C/24 hours, <=1 C/m.
Humidity: 40%-70% RH.
Power supply: AC 220V +/-10%, 10A.
Maximum load capacity: 300 kg.
Vibration tolerance: below 10 Hz amplitude within 2 um P-P; 10-50 Hz acceleration <=0.4 GAL.
Specifications disclaimer
Specifications, configurations, and performance values are for reference only and may vary by model, options, operating environment, and acceptance standard. Final specifications should be confirmed in the quotation or technical agreement.
Recommended Probing and Controller
Standard production package: CZ10T-S motorized head with CF20 touch-trigger modules.
Fast module-change package: CF20 modules with change rack for repeatable stylus switching.
Shop-floor focused package: robust styli, protective operating procedures, and simplified measurement routines for operators.
Controller configuration should be selected based on software, probing type, and production integration needs.
Environment Requirements
Aries is designed for less controlled production environments, but it still needs a stable floor, reasonable vibration control, clean workspace, reliable power, and temperature conditions within the specified range. Avoid direct coolant mist, heavy chips, forklift impact zones, and strong local heat sources.
FAQ
Q: Is Aries intended to be the highest-accuracy PeakMerit CMM?
A: No. Aries is positioned for practical shop-floor and near-line inspection, where accessibility and production feedback are priorities.
Q: Does Aries need a climate-controlled room?
A: Aries is designed to operate across a wider temperature range than lab-focused CMMs, but the site still needs to stay within the stated environmental limits.
Q: Can Aries be moved after installation?
A: Aries has a compact, relocatable structure, but any relocation should be followed by proper setup checks and verification.
Q: What parts fit Aries best?
A: Aries is best for small to medium production parts that need fast dimensional feedback near manufacturing.
CTA
Request an Aries Shop-Floor Review
Share your production layout, part size, tolerance needs, and inspection frequency, and PeakMerit will recommend the right model and setup.